Bottle Jack Manufacturers

Zhejiang Vermillion Import and Export Co., Ltd. is a hydraulic machinery manufacturer with more than 34 years of industry experience, producing bottle jacks in our 30,000 square meter factory in Jiaxing, China. Our bottle jack is a compact, vertical hydraulic lifting tool built around a heavy-duty steel body and a precision pump. The complete Bottle Jack Manufacturers range covers 2 to 100 tons, including low-profile models for tight clearances and high-lift versions for trucks and heavy equipment.

Product Range and Positioning

The catalog is organized into two model families based on the OY-A and OY-B codes. OY-A models are the standard workshop and industrial line, while OY-B models add specific features such as overload protection, non-slip bases, grooved saddles, reinforced frames and smooth-lift pump systems. Both families share the same vertical architecture, compact footprint and release-valve control position.

Within both families, we match saddle type, base footprint, pump effort and lifting range to the working point. The overload safety valve prevents operation beyond rated capacity, and the easy-to-reach release valve gives the operator precise lowering control with every cycle.

Application Fit

Bottle jacks are used where a small footprint and high vertical force are required. Because the hydraulic cylinder is vertical and self-contained, the jack stores upright in a service truck or workshop corner and still delivers the lifting power of a much larger machine.

• Roadside and fleet service: emergency wheel changes, leaf spring and axle work, and equipment leveling outside the workshop.
• Dealer and workshop maintenance: lifting cars, vans and light trucks for underbody access, brake service and suspension work.
• Construction and industrial: leveling steel plates, machine bases and heavy components during installation or alignment.
• Trucks and agricultural equipment: high-lift versions provide additional ram stroke for elevated chassis and heavy machinery frames.

For lower chassis access where horizontal positioning is more practical, our Floor Jack is a separate range. For powertrain removal and gearbox work, the Transmission Jack offers controlled tilt and height adjustment.

Critical Specifications We Match to the Working Point

The right bottle jack is defined by more than tonnage. For every model we quote, our proposal confirms the specifications that determine whether the unit fits the vehicle or machinery:

• Rated capacity and overload valve setting
• Closed height and minimum working clearance
• Lifting range, ram stroke and maximum height
• Saddle form: flat, grooved or adjustable
• Base footprint and contact surface
• Pump strokes and handle effort per full lift
• Oil type, oil capacity and release-valve position
• Net weight and carrying case option

We combine these parameters with the operator's environment. A workshop unit can use a wider base and a longer handle; a roadside emergency kit may need a lighter, lower-profile model with a carrying case. The lifting requirement itself remains the starting point for every configuration.

Configuration and OEM/ODM Options

We build bottle jacks for global wholesalers, distributors, brand sellers and engineering clients. Our OEM and ODM service covers laser marking of customer logos, custom color boxes and cartons, multi-language manuals, and adjustment of product pressure, size, appearance and operating structure to match regional usage habits.

For exclusive programs, our R&D team supports prototype design, sample production, mass production and testing. We keep the minimum order quantity flexible so customers can start with a market-test quantity and scale to full-container orders as demand grows.

Quality Control, Testing and Project Handoff

Our factory operates automated assembly lines and professional testing laboratories. The quality system is ISO9001 certified, core hydraulic products carry CE certification for European market sales, and 100% full inspection runs through production to prevent defective units from leaving the plant. The same inspection discipline applies to trial orders and bulk containers.

Standardized production supports short lead times and stable delivery scheduling from Jiaxing, close to Shanghai Port and Ningbo Port. After shipment, our after-sales support includes technical guidance, operation video tutorials, free replacement for quality problems and long-term low-cost spare parts supply.

Installation, Safety and Maintenance

A bottle jack is a manual, self-contained hydraulic unit. Installation is therefore limited to positioning, oil level confirmation and a load test before use. No electrical supply or permanent mounting is required, which is why the format remains popular for mobile service, construction sites and plant maintenance.

• Pre-use checks: confirm the oil level, inspect for leaks, and make sure the saddle fully engages the load before pumping.
• Operating position: place the jack on a hard, level surface and center the load on the saddle to avoid side loading.
• Lowering control: open the release valve slowly for controlled descent; keep the valve free of dirt and debris.
• Load support: use jack stands whenever a vehicle or component must remain elevated for extended work.
• Storage: store with the ram fully lowered and the release valve closed to protect the pump and seals.

Information We Use to Configure Your Solution

To prepare an accurate configuration and quotation, we use the working point rather than a generic capacity search. The following project data lets our engineering and sales team respond with matched parameters and quotation support within one working day:

• Required lift capacity and number of units
• Minimum clearance and maximum lifting height
• Vehicle, machine or component type and load dimensions
• Saddle preference: flat, grooved or adjustable
• Operating environment: outdoor site, plant floor, coastal or high-moisture area
• Regional standards or certification requirements
• Branding, packaging and manual language
• Trial or bulk order volume and delivery destination

Frequently Asked Questions

What bottle jack capacities does Vermillion manufacture?

We manufacture hydraulic bottle jacks from 2 tons up to 100 tons. The standard OY-A line covers 2 to 50 tons for garage and industrial use; the OY-B line adds 2 to 50 ton variants with features such as overload protection, non-slip bases, grooved saddles and reinforced frames; the OY1100B provides 100 tons for heavy industrial loads.

Can we build an OEM bottle jack with our own brand?

Yes. We support OEM and ODM customization including laser-marked logos, custom color boxes and cartons, and multi-language user manuals. If the project requires changed lifting height, saddle design, pump geometry or appearance, our R&D team can adjust the product structure and produce a prototype before mass production.

What is the difference between OY-A and OY-B bottle jacks?

OY-A models are the standard compact, industrial and workshop line. OY-B models are configured with specific operation or safety enhancements: overload-protected valves, non-slip base pads, grooved saddles, smooth-lift pump systems and reinforced structural frames. The best family depends on load frequency, operating surface and the type of vehicle or machinery being lifted.

How do you control quality before shipment?

We run an ISO9001 quality management system, and core hydraulic products hold CE certification. Production is controlled with 100% full inspection through the manufacturing process, supported by automated assembly lines and professional testing laboratories. This applies to both trial orders and full container shipments.

What information do you need to prepare a bottle jack quotation?

We need the rated lifting capacity, minimum working height, maximum lift height, load dimensions, saddle preference, operating environment, quantity, destination port, packaging language and any certification requirements. With those details, our team provides product parameter matching and quotation support within one working day.

Related Products and Categories

Our portfolio also includes -- Pick Up Crane for applications with different operating ranges, interfaces or integration requirements.