Jack Stand Manufacturers

What the Jack Stand Range Covers

The lineup is organized by rated capacity and working height rather than by vehicle type, because those two variables decide whether a stand actually fits the job. Low-profile 0.75-ton tall-reach models serve extended vertical support, while 2-ton and 3-ton ratchet stands cover the bulk of passenger car and light truck service. The 6-ton and 12-ton models move into heavier vehicle sections, vans, trucks and demanding repair environments.

Each stand shares the same functional architecture: a steel base, a vertical post, and a ratchet or pin adjustment that locks the saddle at a set height. A safety pin adds a second retention layer on ratchet models, and the wide flat base improves stability on workshop floors.

Matching a Stand to the Working Point

A jack stand is a static support device, not a lifting device. It is placed after a hydraulic jack or similar lifter has raised the load, and its job is to hold that load at a fixed height without collapsing or tipping. That distinction drives the selection logic: the rated capacity must exceed the supported load with margin, and the height range must bracket the actual working height of the vehicle or component.

• Capacity margin: match the stand to the load it carries, not to the jack that lifted it. A pair of stands shares the load, but each unit should still be rated for the working condition.
• Height window: the minimum height must clear the lifted chassis, and the maximum must reach the intended service position. OY8003 spans 300–420 mm; OY8006 spans 410–590 mm.
• Base footprint: wide-foot and tripod-base variants improve stability on uneven or high-traffic workshop floors.
• Adjustment type: ratchet adjustment gives stepwise height setting; pin systems suit simpler fixed-position support.
• Handling weight: OY8003 is about 6 kg gross and OY8006 about 10 kg gross, which affects how often a technician will reposition a stand during a shift.

Structure, Materials and Locking

Stands are constructed from high-strength steel, with the base, post and saddle forming the load path. The ratchet mechanism allows the saddle to be locked at multiple positions within the lifting range, and a safety pin provides additional protection against unintended height changes during operation. The broad base footprint distributes load and resists movement while the vehicle is being worked on.

For folding-frame models such as OY802A and OY803B, the compact format trades some base area for easier storage and transport. That makes them suitable for mobile service vehicles and workshops where floor space is limited, provided the floor surface is firm and level.

Configuration Options and Customization

We support OEM and ODM work on the jack stand line. Logo and packaging customization includes laser marking of customer brand logos, custom color boxes, cartons and multi-language manuals. Structural and parameter optimization can adjust size, appearance and operation details to suit regional standards and usage habits in Europe, North America, Southeast Asia and other markets.

• Capacity and height variants within the existing platform
• Base format: standard, wide-foot, tripod or folding frame
• Adjustment style: ratchet with safety pin, or pin-type support
• Branding: laser logo, color box, carton, manual language set
• Exclusive new product development with prototype, sample and mass production stages

Quality Assurance and Compliance Evidence

The factory has passed ISO9001 quality system certification, and core hydraulic products hold CE certification for European market sales. Production follows a full-chain system from raw material machining to finished product shipment, supported by standardized testing procedures and 100% full inspection through production.

For project and distribution programs, we provide the documentation needed to support market entry and after-sales handling. That includes model-level specification sheets, packaging data and the certification evidence applicable to the supplied configuration.

Packaging, Delivery and Spare Parts

Stands are packed in cartons sized for container loading, with 20ft container quantities stated per model. OY8003 ships at 2360 pairs per 20ft container, and OY8006 at 960 pairs, which gives a practical basis for freight planning and mixed-model container builds.

We support flexible MOQ for standard models, including small trial orders for market testing, and scale to bulk full-container cooperation as volume grows. Long-term after-sales technical guidance, operation video tutorials and low-cost spare parts supply are available to reduce maintenance cost across the product life.

Information We Use to Configure Your Solution

A useful quotation depends on the working point, not just the capacity number. We prepare a configuration and price proposal from the following inputs:

• Supported load per stand and whether stands are used in pairs
• Minimum and maximum working height required at the service position
• Vehicle or component type, including ground clearance and chassis geometry
• Floor condition and whether the stand will be moved frequently
• Preferred base format, adjustment type and handling weight
• Branding, packaging and manual language requirements
• Target market, applicable standards and certification needs
• Order quantity, trial-order intent and delivery schedule

Frequently Asked Questions

What capacities and heights are available in the jack stand range?

The line covers 0.75-ton tall-reach, 2-ton, 3-ton, 6-ton and 12-ton models. The OY8003 3-ton stand works from 300 mm to 420 mm, and the OY8006 6-ton stand from 410 mm to 590 mm. Folding-frame and tripod-base variants are available for different floor and storage conditions.

Can jack stands be supplied with our brand logo and packaging?

Yes. We provide OEM and ODM services including laser marking of customer logos, custom color boxes, cartons and multi-language manuals. Structural and parameter adjustments can also be made to suit regional standards and usage habits.

What certifications apply to the jack stand line?

The factory holds ISO9001 quality system certification, and core hydraulic products carry CE certification for European market sales. Applicable certification evidence is confirmed against the specific model and configuration in the proposal.

What is the minimum order quantity for a trial order?

MOQ is flexible for regular standard models. We accept small trial orders for market testing and move to bulk full-container cooperation as volume grows, with more favorable unit pricing at higher quantities.

How are the stands packed and shipped?

Stands are packed in cartons with stated container quantities per model, such as 2360 pairs of OY8003 and 960 pairs of OY8006 per 20ft container. Shipping is arranged from Jiaxing, close to Shanghai Port, Ningbo Port and the Hangzhou Bay Cross-sea Bridge.

What support is available after delivery?

We provide long-term after-sales technical guidance, operation video tutorials, free replacement for quality problems and low-cost spare parts supply to reduce maintenance cost over the product life.