Tyre Balancer Manufacturers

Zhejiang Vermillion Import and Export Co., Ltd. manufactures and supplies tyre balancers for workshops that balance passenger car, SUV and light commercial wheel assemblies. Our range covers four models — OY91002, OY91003, OY91004 and OY91005 — built around 0.2 kW and 0.4/0.6 kW drive systems, 220 V and 380 V supplies, and wheel weight capacity from 65 kg to 150 kg.

Production runs in Jiaxing, Zhejiang, inside a full-chain plant that covers raw material machining through to finished product shipment. The same facility builds our Tyre Changer and other garage equipment, so a complete wheel-service bay can be equipped from one production source.

What Our Tyre Balancer Range Covers

Each model addresses a different working point rather than a different price tier. Drive power, wheel weight capacity and rim envelope are the variables that decide which machine fits a given bay.

• OY91003 Standard-Operation 0.2KW Tyre Balancer — the everyday machine for tyre shops, auto repair centres and multi-bay service facilities running steady daily volumes on standard passenger and light commercial wheels.
• OY91005 Compact-Display 0.2KW Tyre Balancer — the same 0.2 kW drive class in a compact footprint, for bays where floor space is tight and operator training time needs to stay short.
• OY91002 Wide-Rim 0.2KW Tyre Balancer — configured for wide-rim and large-diameter assemblies that sit outside the usual passenger car envelope.
• OY91004 high-precision Heavy-Duty 0.4/0.6KW Tyre Balancer — the heavy end of the range, with 150 kg wheel capacity for light commercial, SUV, 4×4 and premium large-diameter alloy fitments.

Model Specifications at a Glance

The OY91002 wide-rim model completes the range for assemblies that need additional rim-width coverage; its configuration is confirmed against the wheel mix of the project.

Application Fit: Where Each Machine Belongs

Rim diameter coverage of 10"–24" and rim width of 1.5"–20" on the 0.2 kW models matches the bulk of passenger car and light commercial wheels seen in general repair and tyre service work. The 65 kg maximum wheel weight is the practical ceiling for those assemblies.

• Tyre shops and dealership service departments — OY91003 or OY91005 for continuous daily balancing of standard wheels.
• Multi-bay repair centres — OY91003 where several technicians share one machine across shifts.
• Mixed fleets, SUV and 4×4 work — OY91004, whose 13"–24" rim range and 150 kg capacity cover heavier rim and tyre assemblies.
• Wide-rim and large-diameter fitments — OY91002, positioned for rims that exceed the standard envelope.
• Wheel handling around the balancer — our Wheel Dolly keeps heavy assemblies moving between the changer, the balancer and the vehicle.

Static and Dynamic Balancing in the Service Cycle

The wheel assembly is mounted on the machine spindle and held by a cone or equivalent fastening device sized to the centre bore, so the assembly sits concentric and stable through the spin cycle. Correct clamping is what makes the measurement repeatable, and it is the first thing we cover in operator training material.

Static balancing locates the heavy point through the centre of gravity and corrects it with counterweights. Dynamic balancing measures imbalance while the assembly rotates, separating it across the wheel planes and supporting more precise correction on wider wheels. OY91003, OY91004 and OY91005 all identify static and dynamic imbalance, so technicians can place counterweights against a defined reading rather than by feel.

The 0.2 kW models spin at 220 rpm. That balance speed, combined with the drive rating, sets the cycle rhythm for a bay: a machine sized to the wheel mix keeps balancing from becoming the bottleneck behind tyre changing and mounting.

Configuration Options and OEM/ODM Customization

We build standard models for stock programmes and configure them for private-label and regional requirements. Customization is handled by our own R&D team rather than through third parties.

• Brand and packaging — laser marking of your logo on the machine, plus colour box, carton and user manual in English, Japanese, Spanish, French and other languages.
• Structure and parameter optimization — pressure, size, appearance and operating structure adjusted to local industry standards and usage habits in Europe, America, Southeast Asia and other regions.
• Exclusive new product development — prototype design, sample production, mass production and testing for models developed for your own brand.
• Power supply variants — 220 V for the 0.2 kW models, 380 V or 220 V for the OY91004 heavy-duty machine.
• Order flexibility — small trial orders for market testing, with volume pricing on full-container quantities.

Installation, Utilities and Workshop Integration

Balancers are installed as standalone units in a wheel-service bay. Plan a level floor area that clears the shipping envelope — 97×75×115 cm for OY91003 and OY91005, 125×96×110 cm for OY91004 — plus working space for loading and unloading wheels and clear access to the spindle and control panel.

• Confirm the available supply before ordering: single-phase 220 V for the 0.2 kW models, 380 V or 220 V for OY91004.
• Position the machine so the operator can stand clear of the rotating assembly and reach the control panel without leaning over the spindle.
• Keep the balancing area separate from tyre changing and inflation work, and route the Shop Press and other heavy garage equipment away from the balancer footprint.
• Operator safety depends on correct cone selection, secure clamping, hands clear of the spindle during the spin cycle, and locking the assembly before counterweight fitting.

Quality Control and Acceptance

Our factory holds ISO 9001 quality management system certification, and core hydraulic products carry CE certification for European market sales. Inspection runs through production rather than only at final assembly, with full inspection applied to avoid defective goods reaching shipment.

The plant covers more than 30,000 m² with full-chain production workshops, automated assembly lines and a testing laboratory. That structure supports both bulk orders and small trial batches without changing the inspection routine. Products ship to Europe, the USA, Canada, Australia, Japan and Southeast Asia.

Acceptance at your site typically covers a power-up and function check, a repeatability run with a reference wheel, verification of counterweight guidance against a known imbalance, and a review of the manual and spare parts list against the delivered configuration.

Information We Use to Configure Your Solution

Our proposal is based on the working point, the wheel mix and the production target. The following inputs let us match a model, confirm the configuration and quote accurately.

• Rim diameter and rim width range to be balanced, and the heaviest wheel assembly in normal service.
• Expected number of wheels balanced per day and per shift.
• Available power supply and phase at the installation point.
• Floor space and bay layout, including loading clearance.
• Branding requirements: logo marking, colour box, carton and manual languages.
• Target market and any local standard the machine must follow.
• Trial quantity versus planned bulk volume, and the intended delivery port.
• Spare parts kit and documentation requirements for your after-sales operation.

Maintenance, Spare Parts and Documentation

Routine care on a tyre balancer centres on the spindle, clamping cones and fastening devices, the drive belt where fitted, and the cleanliness of the mounting face. Worn or damaged cones are the most common cause of a reading that will not repeat, so we keep them available as service items.

We supply long-term after-sales technical guidance, operation video tutorials and a lifelong low-cost spare parts supply, which keeps maintenance cost predictable for distributors running their own service network. Machines ship in colour boxes with cartons and multi-language manuals, from Jiaxing near Shanghai Port, Ningbo Port and the Hangzhou Bay Bridge.

Frequently Asked Questions

What is the difference between the OY91003, OY91005 and OY91004 tyre balancers?

OY91003 and OY91005 share the same 0.2 kW drive, 220 V supply, 65 kg wheel capacity and 10"–24" rim range; the OY91005 is the compact-display version for tighter bays. OY91004 steps up to a 0.4/0.6 kW drive, 380 V or 220 V supply, 150 kg wheel capacity and a 13"–24" rim range for heavier assemblies.

Which wheel sizes can your tyre balancers handle?

The 0.2 kW models cover rim diameters from 10" to 24" and rim widths from 1.5" to 20", which is the majority of passenger car and light commercial wheels. The OY91004 covers 13" to 24" rim diameters with the same 1.5"–20" rim width, and the OY91002 extends coverage to wide-rim fitments.

Can you supply tyre balancers under our own brand?

Yes. We provide OEM and ODM services covering laser marking of your logo, custom colour boxes, cartons and multi-language manuals, plus structural and parameter adjustments for regional standards. For exclusive models we handle prototype design, sample production, mass production and testing.

What power supply do the machines need?

The OY91003 and OY91005 run on a 220 V supply with a 0.2 kW motor. The OY91004 accepts 380 V or 220 V with its 0.4/0.6 kW dual rating. Confirm the supply at the installation point before the order is finalised so the machine is built for the correct voltage.

Do you supply spare parts and technical documentation?

We provide lifelong low-cost spare parts supply alongside long-term after-sales technical guidance and operation video tutorials. Machines ship with a user manual in the languages you specify, and we can include a spare parts kit sized to your service network.

What certifications do your tyre balancers carry?

Our factory is certified under the ISO 9001 quality management system, and core hydraulic products hold CE certification for European market sales. Full inspection is applied through production to prevent defective goods from reaching shipment.

Zhejiang Vermillion Import and Export Co., Ltd. is a Tyre Balancer manufacturer supplying workshops, distributors and brand sellers from a single production base in Jiaxing, China.