English
русский
Français
Español
عربى
2026-10-30 
Industry News 
Zhejiang Vermillion Import and Export Co., Ltd. manufactures hydraulic vehicle positioning jacks in Jiaxing, Zhejiang, China. Our range covers 1500LBS free-rolling, non-marring, reinforced and heavy-duty models plus an adjustable stand, supplied to wholesalers, distributors, brand sellers and project clients with OEM and ODM support.
Vehicle Positioning Jacks Built for One-Person Vehicle Handling
As a Vehicle Positioning Jack manufacturer, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.
Our Vehicle Positioning Jack lifts one wheel clear of the floor on a hydraulic foot pump and rolls the vehicle in any direction on four swivel casters. A car can be repositioned without starting the engine or using a vehicle lift, which suits body shops, showrooms, detailers and storage operations.
We match product configuration to the application, operating limits and acceptance criteria defined for each project. The range is organized around load rating, wheel contact method and frame construction so that a set of four can be specified for a particular vehicle mix, floor surface and duty cycle.
How the Range Is Positioned
All models share the same working principle: a heavy-duty steel frame, a hydraulic lifting mechanism, a foot pump and a release valve that lowers the vehicle gently. The differences matter when the jack is specified for a particular vehicle mix, floor surface or duty cycle.
| Model | Configuration | Where It Fits |
|---|---|---|
| OY8509 | 1500LBS free-rolling | General workshop repositioning where fast, low-effort rolling is the priority |
| OY8512 | 1500LBS non-marring | Showrooms, detailing bays and finished vehicles where wheel finish must be protected |
| OY8512A | 1500LBS reinforced | Higher-frequency use and heavier vehicle handling in busy shops |
| OY8513 | 1500LBS heavy-duty | Demanding workshop duty with larger vehicles and continuous repositioning |
| OY85102 | Adjustable stand | Supporting and stabilizing positioning jacks during storage and use |
Application Fit Across Vehicle Handling Tasks
A positioning jack set is normally used in fours, one under each wheel, so the vehicle can be moved sideways, forward or backward in a single operation. The working environment decides the model: painted showroom floors, epoxy workshop floors, tight body-shop bays and long-term storage rows each place different demands on caster quality, frame stiffness and wheel contact.
- Auto body and paint shops: move vehicles between prep, booth and reassembly areas without running the engine.
- Showrooms and dealerships: non-marring contact surfaces protect alloy and painted wheels during display changes.
- Detailing and valeting: reposition vehicles for full access to sides, roofs and wheel arches.
- Vehicle storage and parking optimization: roll cars into tighter rows and reclaim floor space.
- Restoration and collector garages: handle vehicles that cannot be driven or started during a project.
Critical Specifications We Confirm Before Production
The load rating is the starting point, but the usable specification is set by the vehicle weight per wheel, the wheel diameter and width, the floor condition and the frequency of use. We confirm these points with the customer before a configuration is fixed.
- Rated capacity: 1500LBS per jack across the standard range, applied to the actual wheel load rather than the total vehicle weight alone.
- Lifting mechanism: hydraulic foot pump with a controlled release valve for gradual lowering.
- Mobility: four swivel casters providing 360-degree movement under load.
- Frame: heavy-duty steel construction with reinforced variants for higher duty cycles.
- Wheel interface: non-marring contact configuration for finished wheels; free-rolling configuration for general workshop use.
Configuration Options and OEM/ODM Customization
We adjust product structure and parameters to suit regional standards and working habits in Europe, America, Southeast Asia and other markets. Customization is handled at the factory level, not through third parties.
Brand and Packaging
Laser marking of customer logos, customized color boxes, cartons and multi-language manuals in English, Japanese, Spanish, French and other languages.
Structure and Parameters
Pressure, dimensions, appearance and operating structure adjusted by our R&D team to match local standards and user habits.
Exclusive Development
Prototype design, sample production, mass production and testing for customer-specific or patented positioning jack designs.
Quality Control and Acceptance
Our factory operates under an ISO9001 quality management system, and core hydraulic products carry CE certification. Production runs through full inspection to keep defective units out of shipments, supported by standardized testing procedures and automated assembly lines.
- Hydraulic function and release valve behavior checked before packing.
- Caster movement and frame integrity verified on assembled units.
- Logo marking, packaging and manual content checked against the approved specification.
- Trial orders and bulk orders follow the same inspection sequence.
Installation, Operation and Maintenance
Positioning jacks arrive assembled and ready for use. Operators place one jack under each wheel, raise the vehicle with the foot pump, and roll it to the target position before lowering it with the release valve. Training material and operation video tutorials are provided for distributor and end-user teams.
- Use on level, load-rated floors and keep the working path clear of debris.
- Match jack capacity to the actual wheel load and never exceed the rated figure.
- Inspect casters, hydraulic seals and the release valve as part of routine shop maintenance.
- Low-cost spare parts are supplied for the full service life of the tool.
Related Garage and Hydraulic Equipment
Positioning jacks are part of a wider hydraulic tool program that covers lifting, supporting and pressing tasks in the same workshop. Distributors often build a mixed container from several families, so the range is designed to share packaging, documentation and after-sales support.
- Air Jack and Scissor Jack for lifting duties alongside positioning work.
- Support equipment such as Jack Stand for stable under-vehicle access.
- Workshop handling tools including Wheel Dolly for moving wheels and tyres.
Information We Use to Configure Your Solution
A precise proposal depends on the working point, not on a generic catalog number. The following inputs let us select the right model, confirm packaging and prepare a quotation.
| Input | Why We Need It |
|---|---|
| Vehicle types and maximum wheel load | Confirms the 1500LBS rating is applied correctly per jack |
| Wheel diameter, width and finish | Determines free-rolling or non-marring contact configuration |
| Floor surface and working area | Guides caster selection and maneuvering expectations |
| Duty cycle and number of units per vehicle | Points to standard, reinforced or heavy-duty frame |
| Branding, packaging and manual language | Defines the OEM/ODM scope and artwork requirements |
| Order quantity and delivery destination | Sets MOQ, packing method and shipping arrangement |
Frequently Asked Questions
What is a vehicle positioning jack used for?
It lifts one wheel clear of the floor so a vehicle can be rolled sideways, forward or backward by one person. Workshops, showrooms and storage facilities use a set of four to reposition cars without starting the engine or using a vehicle lift.
What capacity do your positioning jacks carry?
Our standard range is rated at 1500LBS per jack, covering the OY8509, OY8512, OY8512A and OY8513 models. The correct figure for a project is the load carried by each wheel, which we confirm from the vehicle data before quoting.
Can you supply positioning jacks under our own brand?
Yes. We provide OEM and ODM services including laser logo marking, customized color boxes and cartons, and multi-language manuals. Our R&D team can also adjust pressure, dimensions and operating structure to suit regional standards.
What certifications apply to these hydraulic tools?
Our factory operates under ISO9001 quality system certification, and core hydraulic products hold CE certification for European market sales. Production follows full inspection to keep defective units out of shipments.
Do you accept small trial orders?
We support flexible minimum order quantities for standard models, including small trial orders for market testing, with more favorable unit pricing on bulk full-container orders. Trial and bulk orders run through the same production and inspection process.
How are spare parts and after-sales support handled?
We provide long-term after-sales technical guidance, operation video tutorials and low-cost spare parts for the service life of the tool. Distributors can stock the wear items most relevant to their market, and our team supports troubleshooting directly.
