Motorcycle Lifts Suppliers

Two Lift Architectures, One Platform Family

Every lift in the range shares the same structural logic: a heavy-gauge steel deck carried on a scissor or column frame, a mechanical safety lock that holds the platform if hydraulic or pneumatic pressure is lost, a non-slip deck surface, a removable rear ramp for loading, and braked swivel casters for repositioning inside the bay.

The difference is the power source, and that choice usually follows the workshop's existing infrastructure rather than the motorcycle itself.

Capacity, Deck Length and Machine Fit

Capacity is quoted at 800 lb, 1000 lb and 1500 lb. The 1000 lb hydraulic table is our highest-volume configuration, and it covers the majority of street, cruiser and standard touring motorcycles once the deck is matched to wheelbase.

• 800 lb / compact deck — smaller sport and commuter machines, tight bays, mobile service vans where deck footprint matters more than length.
• 1000 lb / standard deck — general repair, tyre and brake work, routine servicing on mid-weight motorcycles.
• 1500 lb / wide platform — touring bikes, cruisers and heavier machines, plus ATV and side-by-side work where the deck is used as a bench.

Platform length is specified at 1.8 m, 2.0 m or 2.2 m, and we build to other lengths when a program requires it. Deck length should be checked against the longest wheelbase in the fleet with the front wheel clamped and the rear wheel clear of the ramp hinge, not against an average machine.

Deck and Frame Details That Affect Daily Use

• Non-slip deck surface — keeps tyres and stands from creeping during torque work; specified on OY6004 and standard across the range.
• Removable rear ramp — allows single-operator loading and clears the deck once the machine is on the table.
• Mechanical safety lock — a positive bar that holds the platform at working height independently of the hydraulic or air circuit.
• Braked swivel casters — let one person reposition a loaded table and lock it before work begins.
• Foldable and scissor frames — OY6003-B folds for storage; OY6003-A uses a scissor frame for a low collapsed height.

Installation, Utilities and Bay Planning

A lift table is a bay decision as much as a product decision. Hydraulic tables need only floor space and a clear swing area for the pedal; air tables need a compressed-air line at the working position, sized so that lift speed is not lost to pressure drop across a long hose run.

Plan for the collapsed height plus ramp, the raised working height for a standing technician, and the footprint of the casters when the table is pushed against a wall. Where the table will be loaded from a vehicle rather than the floor, the ramp angle and approach clearance matter more than deck length.

Quality Approach and Compliance Evidence

Our factory operates under an ISO 9001 quality management system, and core hydraulic products carry CE certification. Production runs through full inspection rather than sampling, so hydraulic cylinders, safety locks and deck welds are checked before packing.

For programs that need documentation, we supply the certification set that applies to the ordered configuration, along with the model-specific specification sheet. Where a market applies its own lifting-equipment rules, we confirm the applicable configuration before the order is released rather than after.

OEM/ODM and Program Customization

We build for distributors and brand owners, not only for end users. Customization covers the areas that affect sell-through in a specific market.

• Branding — laser marking of the customer logo on the product, plus colour box, carton and multi-language manuals.
• Structure and parameters — deck length, capacity class, appearance and operating layout adjusted to regional standards and working habits.
• Exclusive development — prototype design, sample production, testing and volume manufacturing for a dedicated model.
• Order flexibility — trial quantities for market testing, scaling to container volumes as the line establishes itself.

A lift table rarely ships alone. Programs commonly pair it with a Motorcycle Stand &Dolly for wheel and frame support, or with a Jack Stand set for work carried out beside the table.

Maintenance, Spare Parts and Serviceability

Serviceable design keeps a lift table in revenue service. Hydraulic seals, release valves, air cylinders, casters, ramps and safety-lock components are the wear points, and we supply them as low-cost spare parts over the life of the model.

We provide operation video tutorials and long-term technical guidance for distributors handling their own after-sales, so a workshop issue can be diagnosed without returning the unit. Routine maintenance is limited to hydraulic fluid level and condition, pivot and caster inspection, safety-lock function checks and deck surface condition.

Packaging and Delivery Scope

Lift tables ship as a packed unit with the ramp, hardware and manual included, in export cartons sized for the model. Manuals and carton print can be produced in the languages the destination market requires.

Our location in Jiaxing, Zhejiang gives access to Shanghai and Ningbo ports and the Hangzhou Bay crossing, which supports both full-container programs and smaller trial shipments. Delivery scope is confirmed per order against the configuration, packaging and documentation agreed at quotation stage.

Information We Use to Configure Your Solution

A precise quotation comes from a short, specific brief. These are the inputs that change the model, the price and the packing list.

Frequently Asked Questions

What capacities and platform lengths do you offer?

We build motorcycle lift tables at 800 lb, 1000 lb and 1500 lb, with platform lengths of 1.8 m, 2.0 m and 2.2 m. Other lengths can be produced for a program, and the 1000 lb hydraulic table is our most widely ordered configuration.

Should I choose a hydraulic or an air motorcycle lift?

Choose hydraulic when the bay has no compressed air or when the table is used intermittently; foot-pedal operation is self-contained and needs no external supply. Choose air when shop air is already at the working position and the table cycles many times a day, since compressed-air actuation removes manual pumping from every lift.

Can the lift table be branded and packaged for our own label?

Yes. We provide OEM and ODM support including laser marking of your logo on the product, custom colour boxes and cartons, and manuals in multiple languages. Structural and parameter changes such as deck length, capacity class and operating layout can also be made to suit your market.

What safety features are built into the platform?

Each table carries a mechanical safety lock that holds the platform at working height independently of the hydraulic or air circuit, a non-slip deck surface, a removable rear ramp, and braked swivel casters that lock the table in position before work starts.

What certification and quality documentation is available?

Our factory is certified under the ISO 9001 quality management system, and core hydraulic products hold CE certification. Production is subject to full inspection, and the applicable certification set and model specification sheet are supplied with the ordered configuration.

How are spare parts and after-sales support handled?

We supply low-cost spare parts for the life of the model, covering hydraulic seals, valves, air cylinders, casters, ramps and safety-lock components. Operation video tutorials and long-term technical guidance are provided so distributors can resolve workshop issues locally.