CE-Professional Shop Crane Manufacturers

What the CE-Professional Shop Crane Range Covers

The range is organised around lifting capacity, frame format and folding behaviour rather than around cosmetic variants. Every model uses an adjustable boom arm with multiple positions, letting the operator shorten the reach for heavier loads and extend it for lighter components that need to clear a fender or subframe.

• 1-ton class: compact and foldable frames for smaller bays, motorcycle workshops and mobile service vehicles.
• 2-ton class: the widest selection, spanning economy-duty, standard-duty, quick-fold, compact-fold and adjustable-boom formats.
• 3-ton class: heavy-lift frames for truck, bus and industrial maintenance work.
• 300 kg safety class: a compact heavy-duty unit for tight spaces and lighter component handling.

Models We Supply

Application Fit and Lifting Tasks

These cranes are sized for removing and installing engines, transmissions, axles and other heavy assemblies. The boom position determines the working radius, and the load chart on the frame defines what can be lifted at each position, so the crane is normally selected against the heaviest component plus a margin for rigging and sling weight.

• Engine and transmission removal on passenger cars and light commercial vehicles.
• Drivetrain and axle work in fleet and municipal workshops.
• Motorcycle and powersports service where a compact frame is required.
• Industrial maintenance bays lifting pumps, motors and gearboxes.

Frame, Hydraulics and Mobility

The structure is welded from high-strength steel, with the hydraulic cylinder providing the lifting force and the boom pinning into defined positions. Heavy-duty casters with locking brakes allow the crane to be rolled under a vehicle and then locked in place before the load is taken up.

• Adjustable boom arm with multiple load positions.
• Hydraulic cylinder with controlled release for lowering under load.
• Locking brake casters for stable positioning during lifting.
• Folding frame formats for storage in narrow bays.

Configuration Options We Build To

Because the range is produced in our own workshops, configuration is handled at order stage rather than treated as an afterthought. We confirm the lifting class, frame format and finish against the destination market before production is released.

• Capacity and boom geometry: 1-ton, 2-ton, 3-ton or the 300 kg compact class.
• Frame format: fixed, compact-fold, quick-fold or mobile foldable.
• Branding: laser marking of customer logo on the product.
• Packaging: customised colour box, carton and multilingual user manual.
• Parameter and structure adjustment to suit regional standards and working habits.

Quality Control and Compliance

Our factory operates under an ISO 9001 quality management system, and core hydraulic products carry CE certification for European market sale. Production runs through full inspection so that defective units are held back before packing.

For shop cranes specifically, the checks that matter are weld integrity on the frame and boom, hydraulic cylinder sealing and holding behaviour, caster and brake function, and correct load-chart marking. These are the points we verify before a unit is released for shipment.

Installation, Commissioning and Maintenance

A shop crane arrives largely assembled, with the boom, legs and cylinder to be pinned and tightened before first use. Commissioning is a matter of bleeding the hydraulic circuit, checking the boom positions against the load chart and confirming that the casters lock correctly on the workshop floor.

• Inspect welds, pins and retaining hardware before each shift.
• Check hydraulic fluid level and look for seal weeping.
• Confirm caster brakes hold under load.
• Keep the load chart legible and the boom pinning free of damage.

We supply long-term spare parts support, including hydraulic components and replacement casters, and we provide operation video tutorials for end users. Our wider Products programme covers the complementary garage equipment used alongside a crane, including Engine Stand units for holding an engine once it is out of the bay.

Information We Use to Configure Your Solution

We prepare a configuration and quotation from the working point rather than from a catalogue number alone. The following inputs let us match capacity, boom reach and frame format to the actual job.

OEM, ODM and Project Support

Zhejiang Vermillion integrates R&D, design, production and sales of hydraulic machinery, auto repair tools, garage equipment and motorcycle maintenance tools. For the CE-Professional Shop Crane line this means we can adjust pressure, dimensions, appearance and operating structure for a specific market, and we can develop exclusive models from prototype through sample production, mass production and testing.

Our multilingual sales and engineering team handles parameter matching and quotation support, and we accept small trial orders so a distributor can test a market before committing to container volumes. Spare parts remain available at low cost over the life of the product, which keeps after-sales maintenance predictable for the end user.

Frequently Asked Questions

Which capacity should a workshop choose?

Match the crane to the heaviest assembly the bay will lift, then allow margin for slings and rigging. A 1-ton unit suits light engine and motorcycle work, 2-ton covers most passenger car and light commercial drivetrain jobs, and 3-ton is intended for truck, bus and industrial maintenance.

Are these cranes CE certified?

Core hydraulic products in our range carry CE certification for European market sale, and our factory operates under an ISO 9001 quality management system. We confirm the applicable marking and documentation for the destination market at order stage.

Can the crane be branded and packaged for our own label?

Yes. We laser mark customer logos on the product and produce customised colour boxes, cartons and multilingual manuals covering English, Spanish, French, Japanese and other languages.

What is the minimum order quantity?

For regular standard models the MOQ is flexible. We accept small trial orders for market testing, with more favourable unit pricing on bulk full-container orders.

How are spare parts and after-sales handled?

We provide long-term after-sales technical guidance, operation video tutorials and lifelong low-cost spare parts supply, including hydraulic components and casters, so a crane can be kept in service rather than replaced.

Do you support custom boom or frame dimensions?

Our R&D team adjusts pressure, size, appearance and operating structure to suit regional standards and working habits, and we can develop exclusive models from prototype through mass production for customers requiring a differentiated product.