English
русский
Français
Español
عربى
2026-10-30 
Industry News 
Zhejiang Vermillion Import and Export Co., Ltd. builds and supplies the Motorcycle Stand &Dolly manufacturer range for workshops, dealerships, distributors and private garages that need to lift, hold and move motorcycles without relying on the side stand. The line covers front-wheel stands, L-hook and wheeled stands, A-frame and handlebar stands, a lockable dolly and a full set of interchangeable adapters.
We integrate structural design, standardized manufacturing and export coordination in one operation, so a single order can combine stands, dollies and adapters with consistent packaging, documentation and spare-part supply.
What the Motorcycle Stand & Dolly Range Covers
A motorcycle stand and a motorcycle dolly solve two different problems. A stand lifts and locks one end of the machine so wheels, brakes, chain and fork components can be serviced with the tire off the ground. A dolly keeps the machine upright and lets it be rolled across a workshop floor for storage or repositioning. Our range is organized around that split, with shared adapter interfaces so one workshop can standardize on a single contact system.
Capacity is the first selection variable. We build stands from 300KGS up to 1500LBS, which covers small-displacement commuters, mid-size sport and naked bikes, and heavier cruisers, touring machines and adventure models. The table below maps the main configurations to their typical duty.
| Configuration | Rated Capacity | Contact Style | Typical Duty |
|---|---|---|---|
| OY1549 Front-Wheel Stand | 300 KGS | Front wheel cradle, 400mm working height | Front-end service on small and mid-size bikes |
| OY1547 L-Hook Stand | 300 KGS | L-hook swingarm contact | Rear-end lifting for chain and tire work |
| OY1548 Wheeled Stand | 300 KGS | Rolling base with lift contact | Service bays where the bike must be repositioned |
| OY1000 Sturdy Stand | 300 KGS | Fixed high-strength steel frame | Static storage and long-duration repair |
| OY4500 A-Frame Stand | 1500 LBS | Wide A-frame base | Cruisers, tourers and heavy adventure bikes |
| OY4501 Handlebar Stand | 1500 LBS | Handlebar-style upper contact | Mixed fleets needing an alternative balance point |
| OY1250 Lockable Dolly | 1250 LBS | Wheeled platform with locking function | Showroom, storage and tight workshop layouts |
| AP2–AP6 Adapters | Matched to stand rating | Square-jaw, pin-hook, claw-grip, L-bracket | Swingarm and frame interface matching |
Application Fit Across Workshop and Retail Scenarios
The same stand family is used differently depending on who is buying. A franchised dealer running a service lane needs fast, repeatable lifting on a mixed model mix. A distributor building a catalog needs a coherent range with clear capacity tiers, shared adapters and packaging that survives container freight. A rental or fleet operator needs stands that tolerate frequent use and simple spare-part replacement.
- Service bays: pair a front-wheel stand with an L-hook rear stand to free both wheels, or use a wheeled stand where the bike must be moved mid-job.
- Showrooms and storage: the lockable dolly keeps machines upright, compact and rollable without occupying a lift.
- Heavyweight fleets: the 1500LBS A-frame and handlebar stands give a wider footprint for top-heavy machines.
- Retail programs: adapters sold as separate SKUs extend the usable life of every stand and create repeat-purchase lines.
Engineering Detail That Determines Whether a Stand Works
A stand is only as good as its contact point and its base. The contact point must match the swingarm, frame or wheel geometry of the target machines; the base must resist lateral tipping under load. We build the frames from high-strength steel and use non-slip base elements on the smaller stands so the unit stays put while the operator applies force.
Contact and Adapter Selection
Swingarm spools, flat swingarm sections, hollow axles and front-wheel cradles each need a different interface. Our AP2 square-jaw, AP3 pin-hook, AP4 claw-grip, AP5 L-bracket and AP6 adapters cover the common configurations, and they are interchangeable across the stand range so a workshop can change contact style without replacing the stand.
Stability, Height and Footprint
Working height and base width are the two dimensions that decide whether a stand suits a given bike. The OY1549 front-wheel stand works at 400mm, which suits most small and mid-size machines. The A-frame OY4500 uses a broad base to distribute load and reduce lateral tipping on heavier machines. Where floor space is tight, the foldable and mobile tray designs in the wider support-stand family allow the unit to be stored flat or rolled aside.
Configuration Options and Customization
Because the range is built around a small number of structural platforms, configuration is mostly a matter of capacity, contact style, mobility and branding. We support OEM and ODM work for distributors and brand sellers, including laser marking of customer logos, custom color boxes and cartons, and multi-language manuals.
- Capacity tier: 300KGS, 1100LBS, 1250LBS or 1500LBS platforms.
- Mobility: fixed base, wheeled base, foldable frame or lockable dolly.
- Contact system: front-wheel cradle, L-hook, A-frame, handlebar or adapter-based swingarm contact.
- Branding and packaging: logo marking, retail color box, carton print and manual language set.
- Structural adjustment: our R&D team can adjust dimensions, appearance and operating structure to suit regional usage habits and local standards.
Quality, Inspection and Compliance Evidence
The factory operates under an ISO9001 quality management system, and core hydraulic products carry CE certification for European market sale. Production runs through standardized workshops and testing procedures, with full inspection applied through the process to keep defective units out of shipments.
For stand and dolly orders, the acceptance points that matter are weld quality, frame squareness, load-holding behavior under rated capacity, adapter fit and finish consistency. We can supply the inspection records and certification documents that apply to the ordered models so they can be filed with the shipment.
Related Equipment in the Same Workshop Ecosystem
Stands rarely ship alone. Most orders combine them with lifting and support equipment from the same factory, which simplifies freight consolidation and keeps documentation consistent across the shipment.
- Motorcycle Lift platforms for full-bike elevation, including hydraulic and air-actuated versions.
- Wheel Dolly units for moving vehicles and components around the shop floor.
- Jack Stand pairs for under-vehicle support during combined car and bike service work.
Information We Use to Configure Your Solution
A stand quotation is only accurate when the target machines and the working environment are known. We use the following inputs to select the platform, contact style and packaging, and to prepare a proposal that matches the intended market.
- Machine profile: displacement range, wet weight, swingarm or frame contact geometry, front wheel width.
- Working environment: service bay, showroom, storage room or outdoor use; available floor space and floor surface.
- Capacity target: the heaviest machine the stand must hold, with margin for accessories and luggage.
- Mobility requirement: fixed, rolling, foldable or lockable.
- Adapter needs: spool, flat swingarm, hollow axle or front-wheel cradle contact.
- Branding and packaging: logo placement, box style, carton print, manual languages.
- Order profile: trial quantity, target container loading, destination market and required documentation.
Frequently Asked Questions
What capacity range do you build in the Motorcycle Stand & Dolly line?
We build stands from 300KGS up to 1500LBS and a lockable dolly rated at 1250LBS. The 300KGS platforms suit small and mid-size machines, while the 1500LBS A-frame and handlebar stands are intended for cruisers, tourers and heavier adventure bikes.
Can one stand fit different motorcycles?
Yes, through the adapter system. The AP2 square-jaw, AP3 pin-hook, AP4 claw-grip, AP5 L-bracket and AP6 adapters change the contact interface, so a single stand platform can serve spool-type swingarms, flat swingarms and other common mounting points.
Do you support OEM branding on stands and dollies?
We support OEM and ODM programs, including laser marking of customer logos, custom color boxes and cartons, and manuals in multiple languages. Structural and dimensional adjustments can also be made for regional usage habits and local standards.
What quality documentation accompanies a shipment?
The factory holds ISO9001 quality system certification, and core hydraulic products carry CE certification. Inspection is applied through production, and the certification and inspection documents that apply to the ordered models can be supplied with the shipment.
How are stands packed for container shipping?
Each model has a defined package size and a stated 20FT container quantity, so loading can be planned before the order is placed. Packaging can be upgraded to retail color boxes or printed cartons when the goods are destined for resale rather than workshop use.
Do you supply spare parts after delivery?
We provide long-term spare-part supply for the range, along with technical guidance and operation tutorials. Adapters, contact elements and replacement components can be ordered separately so a stand stays in service rather than being replaced.
