1 Ton 2 Ton Shop Crane Suppliers

What We Build and Where It Fits

A shop crane is a mobile lifting frame: a steel base with swivel casters, a hydraulic ram, and an adjustable boom arm that positions the hook over the load. We build the complete assembly in-house, from frame fabrication and hydraulic cylinder assembly to final load testing, so the boom geometry, ram stroke and caster set are matched to the rated capacity rather than assembled from mismatched parts.

Typical duty cycles include pulling engines, lowering transmissions and axles, moving machine components between bays, and lifting parts onto benches or vehicles. The 2 ton class is our highest-volume size; the 1 ton and 3 ton models serve lighter service bays and heavier industrial lifting respectively.

Our Shop Crane Range

Three sub-ranges let distributors and workshops match certification level, budget and mounting method without changing supplier.

CE-Professional Shop Crane

Our CE-certified professional line is built for daily heavy-duty lifting. High-strength steel frame sections and a durable hydraulic cylinder carry engines, transmissions and axles through repeated cycles. The adjustable boom arm has multiple hook positions so the operator can balance different load weights against the rated capacity at each reach.

• Capacities from 300 kg to 3 ton, including the OY5103 3 ton heavy-lift model
• Compact-lift, foldable, quick-fold and mobile-fold frame variants for tight bays
• Heavy-duty casters with locking brakes for positioning under the vehicle
• Folds for storage when the bay is needed for other work

Economic Shop Crane

The economic range keeps the same lifting principle at a lower frame weight and cost point, which suits distributors building a volume retail programme or workshops that need a second crane for lighter jobs. The OY5102B-72KG uses a hook latch, while the OY5102B-75KG uses a balanced-weight frame; both run a 2 ton rating with an adjustable boom.

Pick Up Crane and Load Levelers

Pick up cranes mount to a truck bed, trailer deck or floor surface and lift with a hand pump — no power source required. The swivel arm rotates 360° for reach around the vehicle, and the foldable mast keeps the bed usable between jobs. We supply 1000 lbs and 2000 lbs models with standard, compact, portable, balanced-arm and adjustable-rotation configurations.

Load levelers from 1000 lbs to 4000 lbs pair with these cranes to keep an engine or transmission level while it is raised or lowered, which matters when the load must clear a firewall or subframe.

Specifications That Drive Selection

Capacity is rated at a specific boom position, not across the whole arm. As the hook moves outward, the safe working load drops, so the working point — not the headline tonnage — determines the correct model.

• Rated capacity and boom position: load weight plus rigging at the actual hook reach
• Lift height and ram stroke: clearance needed to raise an engine over a radiator support
• Frame footprint and folded size: bay width, door width and storage space
• Caster type and diameter: floor condition, thresholds and rolling resistance under load
• Hook and latch: sling, chain or leveler attachment method
• Finish and hardware: coating specification for humid or coastal markets

OEM, ODM and Regional Adaptation

We operate as a China-based hydraulic tool manufacturer with R&D, design and production under one roof, and we take OEM and ODM work as standard rather than as an exception. Customization covers laser marking of your brand logo, colour box and carton artwork, and multi-language manuals in English, Spanish, French, Japanese and other languages.

Our engineering team also adjusts pressure settings, dimensions, appearance and operating structure to suit the standards and working habits of Europe, North America and Southeast Asia. For buyers developing an exclusive model, we handle prototype design, sample production, mass production and testing as a single project.

Quality Control and Acceptance

Our factory holds ISO 9001 quality system certification, and core hydraulic products carry CE certification for European market sale. Production runs through full-chain workshops, automated assembly lines and a testing laboratory, with 100% inspection through the process to keep defective units out of the shipment.

For project orders we agree the inspection scope before production: rated-load verification at the specified boom position, hydraulic ram function and hold, weld and frame inspection, caster and brake operation, finish check, and packaging verification against the approved artwork. Documentation is issued against that agreed scope.

Installation, Maintenance and Spare Parts

Shop cranes arrive largely assembled; the remaining work is boom and ram installation, caster fitting and hydraulic bleeding. Pick up cranes need mounting hardware matched to the truck bed or floor structure, and the mounting surface must be rated for the load.

• Keep the ram rod clean and check hydraulic fluid level before heavy lifts
• Inspect welds, pins, hook latch and caster brakes on a scheduled basis
• Never work under a suspended load or exceed the rated capacity at the hook position
• We supply long-term low-cost spare parts, including rams, seals, casters and hooks

Operation video tutorials and after-sales technical guidance are provided for distributors and end users, and quality-related replacements are handled under our after-sales policy.

Information We Use to Configure Your Solution

Send the following and we will return a model recommendation, packaging plan and quotation. Our multilingual sales and engineering team responds within 24 hours.

• Maximum load weight and the hook reach at which it must be lifted
• Required lift height and the vehicle or machine being serviced
• Available bay footprint, door width and storage constraints
• Mounting method for pick up cranes: truck bed, trailer or floor
• Target market, certification requirement and language for manuals
• Branding assets, packaging artwork and colour specification
• Order quantity, trial-order plan and expected shipment schedule

Related Garage Equipment

Shop cranes are usually ordered alongside the rest of a workshop package. Our range also includes Shop Press units for pressing and straightening work, Engine Stand units for holding an engine once it is out of the bay, and Jack ranges covering floor, bottle, transmission and air types. Combined orders ship together, which simplifies container planning and reduces per-unit freight cost.

Frequently Asked Questions

What capacities do you manufacture?

We build 300 kg, 1 ton, 2 ton and 3 ton shop cranes, plus 1000 lbs and 2000 lbs pick up cranes and load levelers from 1000 lbs to 4000 lbs. The 2 ton class is our highest-volume size.

Which models carry CE certification?

Core hydraulic products, including the CE-Professional shop crane line, hold CE certification, and our factory operates under ISO 9001 quality system certification. We confirm the applicable certification for each model in the quotation.

Can you produce cranes under our own brand?

Yes. We provide OEM and ODM services including laser-marked logos, custom colour boxes and cartons, and multi-language manuals. We also adjust dimensions, pressure settings and operating structure for regional standards.

What is the minimum order quantity?

MOQ is flexible on standard models. We accept small trial orders for market testing and scale to bulk container orders as your volume grows, with better unit pricing at higher quantities.

Do you supply spare parts after delivery?

Yes. We provide lifelong low-cost spare parts supply covering hydraulic rams, seals, casters and hooks, along with after-sales technical guidance and operation video tutorials.

How do I get a quotation?

Send your load weight, hook reach, lift height, bay dimensions, target market and order quantity. Our engineering and sales team returns a model recommendation and quotation within 24 hours.